season_china@139.com

+86-15050678902

Product Categories

Contact Us

Address: 8 Nanfeng First Road, Meicun, Wuxi New Zone, Jiangsu, China

TEL: +8615050678902

FAX: +86-510-85011198

whatsapp:+8615050678902

E-mail: season_china@139.com

Web: www.haida-textile.com

Home > Exhibition > Content
Pre shrinking machine automation level and mechanical lubrication techniques Sep 20, 2017

With the gradual development of automation technology, it began to spread in all kinds of machinery and equipment, of course, including textile machinery. As for the textile machinery such as the pre shrinking machine, the automation technology embodied in it is to improve the automation level of the motor control system, and is being perfected step by step.

It can be said now each sanforizer can show high automation level, but the level is good if you do not pay attention to maintenance still may affect the shrinking effect, must be in strict accordance with the norms of sanforizer inspection and maintenance, so that it can long maintain a good working state.

What should be done in order to lubricate this maintenance item? There are many kinds of bearings in the pre shrinking machine, and these parts should be filled with artificial lubricant regularly. For example, the active mesh belt in the pre shrinking machine should be filled with grease.

K4.jpg

At the same time, you need to lubricate the main spindle with the sprocket, but also regularly brush grease, usually using manual or automatic refueling timing refueling. It should be noted that, whether it is the pre shrinking machine drive shaft or chain and other parts, it is necessary to control the oil injection time, you can monitor the work of the oil circuit through sensors.

In addition, the gear or moving parts in the pre shrunk case must be lubricated, but this is replaced by oil bath lubrication, and the oil must be replaced regularly. Once found sanforizer high-speed operation leads to severe heating box, the circulating forced system through the oil pump as power, to connect the box to the tank, moving parts spray lubrication, make parts get sufficient lubrication.


Jiangsu Haida Textile Machinery Co., Ltd.

Add:8Nanfeng First Road,Meicun,Wuxi New Zone,Jiangsu,China.

Contact us:Season Zhang

Fax:+86-510-85011198

Mob:+8615050678902

whatsapp:+8615050678902

E-mail:season_china@139.com

Web: www.haida-textile.com